⚡️MAGNETIC⚡️ - Making A Magnetic Leather Money Clip - Leather Craft

In this leather craft video I show my process of making a magnetic tooled leather money clip from start to finish. This money clip holds cash via two powerful Neodymium magnets that are sandwiched between two pieces of natural vegetable tanned leather. The outside of the money clip is tooled with a basket weave pattern and is hand stitched together using purple Tiger threaded that matches the purple dyed basket weave accent colors. The edges of the clip are beveled and burnished by hand, and the surfaces have an antique finish applied to help give the clip a vintage look. I hope you find this little leather project interesting and enjoy the creation video.

👇See below👇 for a full list of the tools and materials used on this project, as well as the basic leather dimensions.

What is the Gospel?

Check out my work on my Instagram account .
Follow me at:
https://www.instagram.com/kingdomgloryleather/

Dimensions:
– Outer (Tooled) Piece: 5-1/2” X 1.5” (140mm X 38mm)
– Inner Piece: 5-1/4” X 1.5” (133mm X 38mm)

Materials:
– 1.5mm thick natural vegetable tanned leather.
– N45 Neodymium Magnets (2” X 1” X 1/16”) (51mm X 25mm X 2mm)
– 0.6 Ritza Tiger Thread, Purple
– Fiebing’s Purple Leather Dye
– Fiebing’s Black Pro Dye
– Fiebing’s Black Antique Finish
– Fiebing’s Mink Oil Liquid
– Bee Natural Leathercare RTC Sheridan Resist & Finish
– EcoWeld Contact Adhesive
– Water (For initial edge burnishing)
– Tokonole (For edge burnishing)
– Scotch Brand heavy duty shipping tape. 1.80” wide
– Paper Towels
– Cotton Swabs
– Round Cotton Pads
– Wool Dauber

Tools:
– TechTools 12” T-square ruler
– TechTools 12” Cork backed ruler
– Husky brand box cutter
– X-Acto Knife
– Scratch Awl
– Craftool #X502-2 Basket Weave Stamp
– Craftool #C770 Camouflage Stamp
– 4mm wide piece of wood (For basket weave guide lines)
– KS Blade Punch 4mm Diamond Pricking Irons
– Craftool Pro Burnishing/Sanding Machine
– Owden #1 edge beveler
– Wooden Slicker
– Craftool wing dividers
– Bone Folder
– 1/4 round punch
– Airbrush
– 1” foam brush
– 5oz tack hammer